2025

Haabeth Brox, Julie Marie, Tulek, A., Sehic, A.,  Mulic, A., Utheim, T.P., & Khan, Q. (2025).
Comparative analysis of the protective effects of fluoride compounds on dental erosion in mouse model
BMC Oral Health 25, 401 (2025). Doi: 10.1186/s12903-025-05767-z

Mulic A, Liljenström LMB, Paulsen T. (2025)
Karies – risikovurdering og forebyggelse.
Nor Tannlegeforen Tid. 2025; 135: 188-96.

Haabeth Brox, Julie Marie, Amela Tulek, Amer Sehic, Aida Mulic, Tor Paaske Utheim, and Qalbi Khan. (2025).
The Protective Effects of Silver Fluoride Solution and Fluoride Varnish on Dental Erosion—An In Vivo Study
Dentistry Journal 13, no. 2: 46. Doi: 10.3390/dj13020046

Mathisen, G. H., Svendsen, C., Vist, G. E., Husøy, T., ames, . heather ., Bearth, A., Audebert, M., Bernhard, A., Beronius, A., Bruzell, E. M., Di Consiglio, E., Davenport, M., Druwe, I., Geci, R., Gundert-Remy, U., Hartung, T., Hoffmann, S., Hogberg, H., Hooijmans, C. R., … Whaley, P. (2025).
Identification of concepts of importance for the assessment of internal validity of in vitro toxicology studies using a modified Delphi technique
Zenodo. Doi: 10.5281/zenodo.14656764

Breivik, Anne; Kopperud, Simen E.; Khan, Qalbi; Mulic, Aida & Stein, Linda. (2025)
Preventive measures and perceived challenges in delivering oral health care for elderly patients: a survey of dental hygienists in Norway
Acta Odontologica Scandinavica. Doi: 10.2340/aos.v84.42581

Rolim de Lavôr J, Mendonça da Silva A, Søvik JB, Rosenblatt A, Mulic A, Vieira AR. (2025)
Erosive Tooth Wear, Wine Intake, and Genetic Variation in COMT and MMP2.
Caries Res. 2025;59(1):22-34. Doi: 10.1159/000536333

Kopperud, Hilde Molvig; Wellendorf, Hanne & Grutle, Lene. (2025)
Utlekking fra plastbaserte materialer
Idunn. Doi: 10.18261/ano.50.1.10

2024

Frode Staxrud, Aida Mulic, Simen E. Kopperud. (2024)
Dentists’ Treatment Decisions Concerning Restorations in Adult Patients in North Norway: A Cross-Sectional Tromsø 7 Study.
Caries Res. Doi: 10.1159/000541777

Ranjkesh B, Kopperud HM, Løvschall H. (2024)
Bond strength of resin-based restorative materials to fast-setting calcium silicate cement using different resin adhesive systems.
Eur J Oral Sci. 2024; 132:e13025. Doi: 10.1111/eos.13025

Eliasson ST, Dahl JE. (2024)
Silane and acid etch cross contamination of dentin and composite reduced µ-tensile bond strength.
Biomater Investig Dent. Doi: 10.2340/biid.v11.41933

Julie Marie Haabeth Broxa, Amela Tulekb, Amer Sehica,c, Aida Mulicb,d, Tor Paaske Utheima,c and Qalbi Khana (2024)
Onset and progression of dental erosion in a mouse model
ACTA ODONTOLOGICA SCANDINAVICA 2024, VolL. 83, 453–460. Doi: 10.2340/aos.v83.41193

Lægreid, T. & Mulic., A. (2024)
Adhesjon til erodert tannsubstans – en kasuistikk
Nor Tannlegeforen Tid.; 134: 684-7. Doi: 10.56373/2024-9-3

Catherine C. Bannon, Xinhui Wang, Silvio Uhlig, Ingunn A. Samdal, Pearse McCarron, Thomas Ostenfeld Larsen, Elizabeth M. Mudge. (2024)
Influence of biotic and abiotic factors on prymnesin profiles in three strains of Prymnesium parvum
Algal Research, Science Direct. Volume 78, 103390,ISSN 2211-9264. Doi: 10.1016/j.algal.2024.103390

Samuelsen, Jan T.; Dahl, Jon E. & Staxrud. (2024)
Biologiske effekter av dentale adhesivsystemer
Nor. Tannlegeforen. Tid. 2024; 134: 598-603. DOI: https://doi.org/10.56373/2024-8-5

Breivik A, Mulic A, Sehic A, Valen HR, Kopperud S, Stein L, Khan Q. (2024)
Accumulation and removal of Streptococcus mutans biofilm on enamel and root surfaces in vitro.
Biomater Investig Dent. Jul 12;11:41059. Doi: 10.2340/biid.v11.41059

Uvsløkk, Solveig; Ivanova, Lada; Vanderstraeten, Camille; Grutle, Lene Aiko & AU  - Rangel-Huerta, Oscar Daniel (2024)
Mass spectrometry-based metabolomics study of nicotine exposure in THP-1 monocytes.
Sci Rep 14, Doi: 10.1038/s41598-024-65733-7

Haugli, Ketil Hegerstrøm; Alkarra, Dimitri; Samuelsen, Jan T. (2024)
Digital manufacturing techniques and the in vitro biocompatibility of acrylic-based occlusal device materials
Springer. Clinical Oral Investigations. Doi: 10.1007/s00784-024-05707-1

Abdulaziz Gul, Evaggelia Papia, Aron Naimi-Akbar, Amund Ruud, Per Vult von Steyern. (2024)
Zirconia dental implants; the relationship between design and clinical outcome: A systematic review
Journal of Dentistry, Volume 143. ISSN 0300-5712. Doi: 10.1016/j.jdent.2024.104903

Lene A. Grutle, Heidi V. Holm, Hilde B.M. Kopperud, Silvio Uhlig. (2024
Validation of a human saliva model for the determination of leachable monomers and other chemicals from dental materials,
Journal of Chromatography B, Volume 1236. ISSN 1570-0232. Doi: 10.1016/j.jchromb.2024.124073

Yasuhiro Namura, Helen Pullisaar, Heidi Vanessa Holm, Morten Syverud, Aida Mulic, Vaska Vandevska-Radunovic. (2024)
Elemental composition, corrosion resistance and mechanical properties of computer-aided design and computer-aided manufacturing fixed retainers versus conventional fixed retainers
Journal of Oral Science, Article ID 23-0303, Advance online publication. ISSN 1880-4926. Print ISSN 1343-4934
Doi: 10.2334/josnusd.23-0303

Uhlig S, Cai K, Liskiewicz KA, Pain M, Grutle LA, Røberg-Larsen H, Simm R. (2024)
Profiling of cyclic di-adenyl and -guanyl nucleotides and their precursors and degradation products in bacteria using LC–MS/MS
Sep Sci plus. 2024; 7:e2400039. Doi: 10.1002/sscp.202400039

Staxrud, Frode. (2024)
Behandling av tenner med dyp karies
Universitetsforlaget. Idunn. Doi: 10.18261/ano.49.1.5

2023

Endodontic sealers after exposure to chlorhexidine digluconate: An assessment of physicochemical properties

Repair bond strength of bulk-fill composites: influence of different primers and direction of debonding stress

Functional and aesthetical properties of single dental crowns.

Implantoplasty and the risk of fracture of narrow implants with advanced bone loss: A laboratory study

Investigation of biological effects of HEMA in 3D-organotypic co-culture models of normal and malignant oral keratinocytes

Cobalt-chromium alloys in fixed prosthodontics: Investigations of mechanical properties and microstructure

Biological aspects of modern dental composites

Deterioration of direct restorative materials under erosive conditions with impact of abrasion and attrition in vitro

De mest brukte komposittene på det norske markedet oppfyller ikke alle formelle krav i ISO-standarden

Presence of 6PPD-quinone in runoff water samples from Norway using a new LC–MS/MS method

Silver release from dentine treated with combinations of silver diamine fluoride, potassium iodide and etching

Preparation of a fluorinated dental resin system and its anti-adhesive properties against S. mutans

Oral lesions associated with daily use of snus, a moist smokeless tobacco product. A cross-sectional study among Norwegian adolescents

Association of locus Xq26.1 – 27.3 with Erosive Tooth Wear Phenotypes in a Group of Adolescents

2022

Bacterial phototoxicity of lumichrome photocrosslinked collagen hydrogels

Use of Swedish smokeless tobacco during pregnancy: A systematic review of pregnancy and early life health risk

Resin-based cements – properties affecting clinical success of indirect restorations

How French dentists manage defective restorations: Evidence from ReCOL the French dental practice-based research network –A survey study

Surface characteristics and bacterial adhesion of endodontic cements

Effect of chlorhexidine digluconate on antimicrobial activity, cell viability and physicochemical properties of three endodontic sealers

Photoactive Zr-aromatic hybrid thin films made by molecular layer deposition

Potential of «universal» bonding agents for composite repair

Optical and mechanical properties of multi-layer zirconia

Sintering temperature accuracy and its effect on translucent yttria-stabilized zirconia: Flexural strength, crystal structure, tetragonality and light transmission

Protein-coated nanostructured surfaces affect the adhesion of Escherichia coli

Wear particle release at the interface of dental implant components: Effects of different material combinations. An in vitro study

The dentine-sealer interface: Modulation of antimicrobial effects by irrigation

Shear bond strength of resin bonded zirconia and lithium disilicate – effect of surface treatment of ceramics and dentin

Hvordan utføre rettsodontologisk identifisering av personer uten tannrestaureringer?

3D printing i odontologi

2021

Factors associated with initiation and use of snus among adolescents

Therapeutic Strategies for Dry Mouth Management with Emphasis on Electrostimulation as a Treatment Option – Review Article

Áhrif sílans og ljósherðingar á viðgerðarstyrk plastblendis

Medical devices in dentistry – the new MDR regulation

Molecular layer deposition of photoactive metal-naphthalene hybrid thin films

When to intervene in the caries process? An expert Delphi Consensus statement

Pre-cementation procedures’ effect on dental zirconias with different yttria content

Characterization and toxicity evaluation of air-borne particles released by grinding from two dental resin composites in vitro

Genetic Aspects of Dental Erosive Wear and Dental Caries (Review Article)

Survival of primary molars with pulpotomy interventions: public oral health practice-based study in Helsinki

Luting cements in a nutshell

The influence of the resin- based cement layer on ceramic-dentin bond strength

Áhrif þykktar bindilags og yfirborðsmeðferða á viðgerðarstyrk plastblendis

Scaffold-Free Engineering of Human Cartilage Implants

Violet‑blue light exposure of the skin: is there need for protection?

Stainless-steel crowns in children: Norwegian and Finnish dentists’ knowledge, practice and challenges

Allergic reaction after treatment with a mandibular advancement device

The dream of new teeth

Knowledge on and treatment practices of erosive tooth wear among Finnish dentists

Antimicrobial and physicochemical characterization of endodontic sealers after exposure to chlorhexidine digluconate

Hvor mye monomer kan lekke fra en protese?

2020

Adhesion of Escherichia Coli to Nanostructured Surfaces and the Role of Type 1 Fimbriae

Awareness, knowledge and treatment decisions for erosive tooth wear: A case-based questionnaire among Danish dentists

In vitro abrasivity and chemical properties of charcoal-containing dentifrices

Aerosols in the dental clinic. Part 2: Precautions for reducing infection

Aerosols in the dental clinic. Part 1: Risks of infectious disease transmission

Effect of silica nano-spheres on adhesion of oral bacteria and human fibroblasts

Cobalt–chromium alloys fabricated with four different techniques: Ion release, toxicity of released elements and surface roughness

Functional, compositional, and regulatory analyses of imported and non‐imported single dental crowns

Dentin to dentin adhesion using combinations of resin cements and adhesives from different manufacturers – a novel approach

Protein Profiles of Individuals with Erosive Tooth Wear

In Vitro Effects of Dental Monomer Exposure – Dependence on the Cell Culture Model

Er helserisikoen ved snus undervurdert?

Obesity and oral health

Ion release from three different dental alloys – effect of dynamic loading and toxicity of released elements

The frequency of enamel and dentin caries lesions among elderly in Tromsø, Norway

Estimating molar-incisor-hypomineralization among 8-year-olds based on 15-year public oral health practice-based data

Dental erosion in mice with impaired salivary gland function

Restorative material choices for extensive carious lesions and hypomineralisation defects in children: a questionnaire survey among Finnish dentists

Effect of thermal cycling on temperature changes and bond strength in different test specimens

Aquaporins’ Influence on Different Dental Erosive Wear Phenotypes in Humans.

MOF thin films with bi-aromatic linkers grown by molecular layer deposition

Commentary Guidelines on the benefit-risk assessment of the presence of phthalates in certain medical devices covering phthalates which are carcinogenic, mutagenic, toxic to reproduction (CMR) or hav

Snus i svangerskapet er en fare for barnet

2019

Dysphagia, aging and oral health

Investigation on the antimicrobial activity of chitosan-modified zinc oxide-eugenol cement

GUIDELINES on the benefit-risk assessment of the presence of phthalates in certain medical devices covering phthalates which are carcinogenic, mutagenic, toxic to reproduction (CMR) or have endocrine-disrupting (ED) properties

Bond strength between dentine and a novel fast-setting calcium silicate cement with fluoride

Erosive properties of sour sweets and drinks

Antimicrobial photodynamic therapy for treatment of oral biofilm associated diseases – where we are

Antibacterial photodynamic therapy for treatment of oral biofilms related to periodontal and peri-implant diseases

Photostability of an anionic porphyrin in natural deep eutectic solvents (NADES)

Light sources and light-dependent procedures in dentistry

A comparison of Norwegian and overseas made dental metallic crowns

Influence of Fibrinogen on Staphylococcus epidermidis Adhesion Can Be Reversed by Tuning Surface Nanotopography

Patient related factors and dental implants

Establishing a macrophage model with relevance for oral methacrylate monomer exposures: Attenuated Staphylococcus aureus-induced cytokine release from human macrophages

The frequency of enamel and dentin caries lesions among elderly Norwegians

Comparison of sandblasted, ground and melt-etched zirconia crowns regarding adhesion strength to resin cement

Treatment decisions regarding caries and dental developmental defects in children a questionnaire-based study among Norwegian dentists

An update on erosive tooth wear – prevalence, registration, etiology, genetic and treatment principles

Réparation des restaurations défectueuses – Connaissances et attitudes thérapeutiques en France

Prevention of snus use: Attitudes and activities in the Public Dental Service in the south‐eastern part of Norway

Effect of methacrylated chitosan incorporated in experimental composite and adhesive on mechanical properties and biofilm formation

Thermal induced deflection of a porcelain–zirconia bilayer: Influence of cooling rate

Bleaching of the Discolored Traumatized Tooth

Debonding mechanism of zirconia and lithium disilicate resin cemented to dentin

2018

The dental monomer HEMA causes proteome changes in human THP‐1 monocytes

Hvor god er du til å bestemme farge på restaureringene dine?

Peroxide-free tooth whitening products

Effect of methacrylated chitosan incorporated in experimental composite and adhesive on mechanical properties and biofilm formation.

The dental monomer 2-hydroxyethyl methacrylate (HEMA) causes transcriptionally regulated adaptation partially initiated by electrophilic stress

Opinions and Treatment Decisions for Dental Erosive Wear: A Questionnaire Survey among Icelandic Dentists

Bonding of Composite and Glass-ionomer to Amalgam

Di-n-butyl phthalate modifies PMA-induced macrophage differentiation of THP-1 monocytes via PPARγ.

Digital evaluation of marginal and internal fit of single-crown fixed dental prostheses

Biofilms and their properties

New animal model of extrinsic dental erosion-Erosive effect on the mouse molar teeth

Optimizing quality and safety of dental materials

Preparation and characterization of Bis-GMA-free dental composites with dimethacrylate monomer derived from 9,9-Bis[4-(2-hydroxyethoxy)phenyl]fluorene.

Dementia. Are dentists protected?

Dental calculus as a time capsule

Presence and leaching of bisphenol a (BPA) from dental materials

Nrf2 Signaling and Cytoprotection in Human Epithelial Airway Cells Exposed to HEMA

Lysherding – så enkelt og så vanskelig.

Side effects of chemical compounds used in dental clinics

Redefining the Phenotype of Dental Caries

2017

A retrospective clinical study on the longevity of posterior Class II cast gold inlays/onlays.

Taste and smell perception in aging (Aldring, smak og lukt)

Antibacterial Activity of Endodontic Sealers against Planktonic Bacteria and Bacteria in Biofilms.

Survival of extensive restorations in primary molars: 15-year practice-based study.

Role of Proteolytic Enzyme Inhibitors on Carious and Eroded Dentin Associated With a Universal Bonding System

Internal fit of three-unit fixed dental prostheses produced by computeraided design/computer-aided manufacturing and the lost-wax metal casting technique assessed using the triple-scan protocol

Komposittmaterialer – utlekking av monomer og cytotoksisitet

Kontrol og bekæmpelse af dental biofilm

SCHEER: Preliminary Opinion on the potential risks to human health of Light Emitting Diodes (LEDs)

Is dental erosive wear a common condition among 16-year-olds in Troms, Norway?

Effect of curing and silanizing on composite repair bond strength using an improved micro-tensile test method

Water sorption and solubility of polyamide denture base materials

Kemiske stoffers skadevirkninger på tandklinikker (Side effects of chemical compounds used in dental clinics)

Brug af fysiske værnemidler på tandklinikker (Use of physical protective equipment at dental clinics)

Bacterial biofilm elimination using gold nanorod localised surface plasmon resonance generated heat

Investigation of the antimicrobial effect of natural deep eutectic solvents (NADES) as solvents in antimicrobial photodynamic therapy

A novel etching technique for surface treatment of zirconia ceramics to improve adhesion of resin-based luting cements

Relation between In Vitro Toxicity and the Thiol-Reactivity of Methacrylates in Resin-Based Biomaterials

Leakage of Bisphenol A from Dental Materials

The dental monomer hydroxyethyl methacrylate (HEMA) counteracts lipopolysaccharide-induced IL-1β release-Possible role of glutathione.

Light curing procedures – performance, knowledge level and safety awareness among dentists

Oral mikroflora – et reservoir av antibiotikaresistensgener?

2016

NIOM – Fortyfive years of Nordic dentistry

How do resin composites perform in the long run?

Composite restorative materials – basic properties

Endodontic materials – irrigants, sealers, and obturating materials

Dental ceramics – Classification and properties

Base metal alloys for fixed prosthodontics

The influence of dental loupes on the ocular hazard.

Dentale restaureringsmaterialer: Biologiske egenskaper og deres kliniske konsekvenser

Internal fit of single crowns produced by CAD/CAM and lost-wax metal casting technique assessed by the triple-scan protocol

Degree of conversion and leached monomers of urethane dimethacrylate-hydroxypropyl methacrylate-based dental resin systems.

Are probiotics relevant for oral health?

Antibacterial and Antibiofilm Effect of Low Viscosity Chitosan against Stapylococcus epidermides

Repair of defective composite restorations. A questionnaire study among dentists in the Public Dental Service in Norway

Treatment decisions on Molar-Incisor Hypomineralization (MIH) by Norwegian dentists – a questionnaire study

Anti-biofilm Effect of Methacrylated Chitosan Incorporated Denture Base Resin

Thiophenone Attenuates Enteropathogenic Escherichia coli O103:H2 Virulence by Interfering with AI-2Signaling

Physicochemical characterisation and antimicrobial phototoxicity of an anionic porphyrin in natural deep eutectic solvents

Morphological and mechanical characterization of composite bone cement containing polymethylmethacrylate matrix functionalized with trimethoxysilyl and bioactive glass

Wavelength dependent increase in cell sensitivity after glutathione inhibition by methacrylate monomers.

The Dental Curing Light: A Potential Health Risk

Oral health and congitive function

Proteome Changes Indicate Oxidative Stress and Protein Damage after Methacrylate Exposure in Human Monocyte Cell Line

The Post-Amalgam Era: Norwegian Dentists’ Experiences with Composite Resins and Repair of Defective Amalgam Restorations

Phototherapy with sunlight for treatment of neonatal jaundice in low-income countries

Hyperspectral fluorescence characterisation of bacteria.

Comprehensive Transcriptome Profiles of Streptococcus mutans UA159 Map Core Streptococcal Competence Genes

Effect of Components in Resin-Based Dental Restoratives on Protein-S-Glutathionylation

Exposure to Dental Monomer Hydroxyethyl Methacrylate (HEMA) Induces Increased Transcription of Genes Involved in Oxidative Stress Responses

Effekter i munnhulen ved bruk av snus

Occlusal Caries Management: Preferences among Dentists in Norway

The safety of the use of bisphenol A in medical devices

Posterior composites and new caries on adjacent surfaces – any association? Longitudinal study with a split-mouth design

The safety of dental amalgam and alternative dental restoration materials for patients and users

Load at fracture of monolithic and bilayered zirconia crowns with and without a cervical zirconia collar

Toxicity of plast materials

2015

Interactions of liposomes with dental restorative materials

Characterization and antimicrobial phototoxicity of curcumin dissolved in natural deep eutectic solvents

Risk factors for caries development on tooth surfaces adjacent to newly placed Class II composites – a pragmatic, practice based study

Cyclodextrins influence on lumichrome solubilization and phototoxic efficacy against bacteria.

Evaluation of material suitability for nanoparticle-based coatings and further antimicrobial treatment

Silanising agents promote resin-composite repair

In vitro element release and biological aspects of base-metal alloys for metal-ceramic applications

Scientific Opinion on the safety of dental amalgam and alternative dental restoration materials for patients and users

Evaluation of eye protection in occupational use of non-coherent optical sources

Influence of formulation on photoinactivation of bacteria by lumichrome.

The effect of margin curvature on load at fracture of ceramic crowns

Cell toxicity of 2-hydroxyethyl methacrylate (HEMA): the role of oxidative stress

Relative Efficiency Of Ultraviolet Radiation A And B Combined With A Chemical Stressor On Zebrafish Embryos

Cements for gold inlays

Improved antibacterial phototoxicity of a neutral porphyrin in natural deep eutectic solvents

Patient satisfaction and complications of over-the-counter bleaching products

Safety of the use of bisphenol A in medical devices

Placebo/nocebo

Computer-controlled production of prosthetic constructions in the dental office – what are the quality requirements?

Appropriate eye protection filters prevent ocular damage

Chitosan – antibacterial use in dental materials

Guidance on the Determination of Potential Health Effects of Nanomaterials Used in Medical Devices

2014

Appropriate eye protection filters prevent ocular damage from curing light

Fluorescence characterization of dental plaque by hyperspectral imaging

Importerte og norskproduserte tanntekniske arbeider – får vi det vi bestiller?

Ceramic Crown Margin Curvatures’ Effect on Fracture Strength

Effect of different surface treatments and adhesives on repair bond strength of resin composites after one and 12 months of storage using an improved microtensile test method.

Sub-lethal Concentrations of HEMA alter Protein Expression in Human Monocytes

Ultraviolet Radiation and Multiple Stressor Effects on Zebrafish Embryos

Nytt fra NIOM: Retningslinjer for lysherding i odontologi

Antibacterial fillings. Where are we today?

The influence of bis-EMA vs bis-GMA on the degree of conversion and water susceptibility of experimental composite materials

Antibacterial phototoxic effects of synthetic asymmetric and glycosylated curcuminoids in aqueous formulations: studies on curcumin and curcuminoids. LIV.

Simulation of clinical fractures for three different all-ceramic crowns.

Formulation and characterisation of lyophilised curcumin solid dispersions for antimicrobial photodynamic therapy (aPDT)

Photoinactivation of bacteria by lumichrome: Influence of formulation and preparation method.

Formulation and characterization of lyophilized curcumin solid dispersions for antimicrobial photodynamic therapy (aPDT): Studies on curcumin and curcuminoids LII

The effect of short curing time on chemical and mechanical properties of the composites

Biofilm formation on nanostructured hydroxyapatite-coated titanium.

Leaching of monomers from bulk-fill composites

Safe use of dental laser

TEGDMA and filler particles from dental composites additively attentuate LPS-induced cytokine release from the macrophage cell line RAW 264.7

Glass ionomer – a suitable restorative material in deciduous teeth?

Fractures in dental ceramics: research and clinical experience

2013

Cell toxicity of methacrylate monomers-the role of glutathione adduct formation.

Experimental investigation of the effect of surface roughness on bone-cement-implant shear bond strength.

Summary of: Side effects of external tooth bleaching: a multi-centre practice-based prospective study.

Solubility and strength of zirconia-based dental materials after artificial aging

Clinically relevant evaluation of fracture strength of all-ceramic crowns

Ex tempore prepared superstaurated solutions of curcumin intended for aPDT

Hyperspectral imaging/reflectance spectroscopy of mouse oral tissue exposed to high intensity blue light.

Antimicrobial photodynamic treatment of oral infections

Safety of optical light sources in the dental clinic

Clinically relevant fracture testing of all-ceramic crowns

Detection of leachables and cytotoxicity after exposure to methacrylate- and epoxy-based root canal sealers in vitro.

Biofilm formation on nanostructured hydroxyapatite-coated titanium

Effect of short LED lamp exposure on wear resistance, residual monomer and degree of conversion for Filtek Z250 and Tetric EvoCeram composites.

Surface modification of fiber reinforced polymer composites and their attachment to bone simulating material

Osteoporosis and periodontal disease

Supersaturation and supersaturated drug delivery systems to surpass the outher membrane barriers of Gram negative bacteria in antimicrobial photodynamic therapy (aPDT).

Application of nanovehicles in preparations for antimicrobial photodynamic therapy (aPDT)

Antibacterial effects of native and methacrylate modified chitosan

Dental monomers inhibit LPS-induced cytokine release from the macrophage cell line RAW264.7

Solid dispersions for preparation of phototoxic supersaturated solutions for antimicrobial photodynamic therapy (aPDT) Studies on curcumin and curcuminoides L

Solid dispersions for preparation of phototoxic supersaturated solutions for antimicrobial photodynamic therapy (aPDT): Studies on curcumin and curcuminoides L

2012

Influence of different mould materials on the degree of conversion of dental composite resins

Surface structure of fiber-reinforced composite implant and its effect on the attachment of implant to simulating bone material

Stress and periodontal disease

Import av tanntekniske arbeid

Titan – det biokompatible metallet med potensial for forbedring

Fracture mode during cyclic loading of implant-supported single-tooth restorations

The development of T cell-dominated inflammatory responses induced by sodium lauryl sulphate in mouse oral mucosa

Photoinactivation of Stahpylococcus epidermidis biofilms and suspensions by the hydrophobic photosensitizer curcumin- effect of selected nanocarrier Studies of curcumin and curcuminoides XLVII

Feeding tubes for neonates – leaching of plasticizers in food simulating solutions and resulting changes in mechanical properties.

Keramer

Sealing ability of mineral trioxide aggregate, glass ionomer cement and composite resin when repairing large furcal perforations.

Detection and quantification of monomers in unstimulated whole saliva after treatment with resin-based composite fillings in vivo

Mono-2-ethylhexylphthalate (MEHP) induces TNF-α release and macrophage differentiation through different signalling pathways in RAW264.7 cells.

Biologiske effekter av dentale fyllpartikler

Metakrylat-exponering via luftvägarna

Impact of Curcumin Supersaturation in Antibacterial Photodynamic Therapy—Effect of Cyclodextrin Type and Amount: Studies on Curcumin and Curcuminoides XLV

2011

Sammendrag av doktorgradsavhandling: «Toxicity of resin based dental restorative materials in vitro»

Acidity and titrable acidity of different soft drinks and beverages in Norway

Biotransformation enzymes and lung cell response to 2-hydroxyethyl-methacrylate.

“Dentistry ― Polymer-based restorative materials”

Skadelig innhold i skyllevæske og tannkremer?

Oral cancer, dental biomaterials, and inflammation

Stoffer i plastfyllingsmaterialer kan gi celleskader

Optical characterization of biomaterial/radiation-exposed oral mucosa by reflection spectroscopy

Role of bonding agents in the repair of composite resin restorations

Biological and physicochemical properties of carbon-graphite fibre-reinforced polymers intended for implant suprastructures

Health hazard from resin-modified glass ionomer materials in pediatric dentistry.

DNA damage, cell-cycle arrest and apoptosis induced in BEAS-2B cells by 2-hydroxyethyl methacrylate (HEMA).

Nytt om herdelamper.

Identification and quantification of leachable substances from polymer-based orthodontic base-plate materials.

Role of thiol-complex formation in 2-hydroxyethyl-methacrylate-induced toxicity in vitro

A screening of curcumin derivatives for antibacterial phototoxic effects studies on curcumin and curcuminoids. XLIII.

Contemporary tooth-coloured filling materials

2010

Kvikksølv og tannhelsepersonell

Estrogenicity and resin based dental materials

Methacrylate monomers lower the level of reduced glutathione and increase the in vitro sensitivity of cells to optical radiation

In vitro photosensitization initiated by camphorquinone and phenyl propanedione in dental polymeric materials.

Annonsering og tannbehandling

Mapping of titanium particles in peri-implant oral mucosa by Laser Ablation Inductively Coupled Plasma Mass Spectrometry and high-resolution optical darkfield microscopy

Photokilling of bacteria by curcumin in selected polyethylene glycol 400 (PEG 400) preparations. Studies on curcumin and curcuminoids, XLI.

Formulation and Bacterial Phototoxicity of Curcumin Loaded Alginate Foams for Wound Treatment Applications: Studies on Curcumin and Curcuminoides XLII

DNA damage and DNA damage responses in THP-1 monocytes after exposure to spores of either Stachybotrys chartarum or Aspergillus versicolor or to T-2 toxin.

Phototoxicity of curcumin loaded alginate foams to Enterococcus faecalis and Escherichia coil in vitro

Promotion of Adhesion Between Resin and Silica-coated Titanium by Silane Monomers and Formic Acid Catalyst

Titan för odontologiska applikationer. Biologiska aspekter

Elution of substances from a silorane-based dental composite

Responses of the pulp–dentin organ to dental restorative biomaterials.

2009

Slimhinneforandringer forårsaket av dentale materialer og optisk stråling

In vitro corrosion of self-engaging orthodontic brackets

Bivirkninger ved tannbleking

Adhesion properties in systems of laminated pigmented polymers, carbon–graphite fiber composite framework and titanium surfaces in implant suprastructures

Effects of UV radiation and visible light on oral mucosa characterised by reflection spectroscopy

Effect of thermal cycling on flexural properties of carbon-graphite fiber-reinforced polymers

Comparison of Different Etching Agents and Repair Materials Used on Feldspathic Porcelain

Fråga NIOM: Dagsläget för rotfyllning med adhesiv binding

Filler Particles Used in Dental Biomaterials Induce Production and Release of Inflammatory Mediators In Vitro

Laserbehandling av infeksjoner ved tenner og dentale implantater

Tannleger har forhøyet forekomst av hudkreft

In vivo and in vitro irritation testing of low concentrations of hydrofluoric acid

Bleking av tenner – lege artis?

Photokilling of bacteria by curcumin in different aqueous preparations. Studies on curcumin and curcuminoids XXXVII.

In vitro efficacy and risk for adverse effects of light-assisted tooth bleaching

Use of diagnostic x-ray among Norwegian dentists. A survey and inspection based on new radiation protection regulations.

Corrosion of dental nickel-aluminum bronze with a minor gold content – mechanism and biological impact.

2008

Spør NIOM: Hvor står vi når det gjelder adhesive rotfyllinger?

Influence of thermal cycling on flexural properties of composites reinforced with unidirectional silica-glass fibers.

Cytotoxicity of silica–glass fiber reinforced composites

Wettability, water sorption and water solubility of seven silicone elastomers used for maxillofacial prostheses.

A prospective study on the clinical performance of polysiloxane soft liners: one-year results.

The effects of EDTA and iodine-potassium iodide on the adhesion properties of root filling materials

Spør NIOM: Komposittfyllinger – suksess eller fiasko?

Bond strength of luting materials to ceramic crowns after different surface treatments.

Provning (skjuvtest) av bondingmaterial enligt ISO/TS 11405:2003

Bacterial penetration along different root canal filling materials in the presence or absence of smear layer

Toxicity evaluation of root canal sealers in vitro.

HEMA reduces cell proliferation and induces apoptosis in vitro.

Plastfyllinger og nanoteknologi

2007

Adverse patient reactions during orthodontic treatment with fixed appliances

Lampor för blekning och blekning/härdning (kombinationslampor)

LED (Light Emitting Diodes) – lampor för ljushärdning av dentala material.

Bond strength between a silica glass-fiber-reinforced composite and artificial polymer teeth.

Dentale plastmaterialer kan utløse toksiske responser i munnslimhinnen

Dentale plastmaterialer har potensial for å utløse toksisk reaksjoner

Evaluation of bond strength of soft relining materials to denture base polymers

Mechanical and physical properties of carbon-graphite fiber-reinforced polymers intended for implant suprastructures.

Effect of thermal cycling on composites reinforced with two differently sized silica-glass fibers

Polymer based restorative materials – a study of important properties

Evaluation of eye protection filters for use with dental curing and bleaching lamps.

Potential of dental adhesives to induce mucosal irritation evaluated by the HET-CAM method

Valg av herdelampe

Spør NIOM: Øyebeskyttelse ved herding og bleking

Tannbleking

Cytotoxicity of new resin-, calcium hydroxide- and silicone-based root canal sealers on fibroblasts derived from human gingiva and L929 cell lines

Apoptosis induced by the monomers HEMA and TEGDMA involves formation of ROS and differential activation of the MAP-kinases p38, JNK and ERK.

Involvement of NADPH Oxidase and iNOS in Rodent Pulmonary Cytokine Responses to Urban Air and Mineral Particles

Regulation of rat alveolar type 2 cell proliferation in vitro involves type II cAMP-dependent protein kinase

2006

Tandblekning med och utan ljus

Rapport från NIOM: Uedle metaller til dentale kroner og broer.

Bond strength of a composite luting agent to alumina ceramic surfaces

Pattern of cell death after in vitro exposure to GDMA, TEGDMA, HEMA and two compomer extracts

Tannbleking med lys – science or fiction?

In vitro biocompatibility of denture relining materials

2005

Corrosion of dental aluminium bronze in neutral saline and saline lactic acid.

Bond strength of composite luting cement to zirconia ceramic surfaces

Evaluation of adhesion of chairside hard relining materials to denture base polymers.

Direct relining of dentures with soft materials

Toxicity of endodontic filling materials

Fråga NIOM: Fiberarmerade protetiska material. Vad kan vi göra i dag og vilka möjligheter kommer att finnas i framtiden?

NIOM i endring. Nytt fra NIOM

Evaluation of two matrix materials intended for fiber-reinforced polymers

Formation of photoproducts and cytotoxicity of bilirubin irradiated with turquoise and blue phototherapy light.

Effects of bilirubin and phototherapy on osmotic fragility and haematoporphyrin-induced photohaemolysis of normal erythrocytes and spherocytes.

Bilirubin-induced cell death during continuous and intermittent phototherapy and in the dark.

Irritation and cytotoxic potential of denture adhesives.

Studies on curcumin and curcuminoids. XXIX. Photoinduced cytotoxicity of curcumin in selected aqueous preparations.

An in vitro comparison of the shear bond strength of a resin-reinforced glass ionomer cement and a composite adhesive for bonding orthodontic brackets

Physicochemical evaluation of silica-glass fiber reinforced polymers for prosthodontic applications

Hvor holdbare er komposittmaterialene?

Spør NIOM: Tannbleking med lys – hvor står vi i dag?

Static immersion and irritation tests of dental metal-ceramic alloys.

In vivo spectroscopy of jaundiced newborn skin reveals more than a bilirubin index

2004

Dentinbinding – forståelse for produktet er viktigst

Adhesivsystem

Health hazards associated with curing light in the dental clinic.

In vitro cell death induced by irradiation and chemicals relevant for dental applications; dose-response and potentiation effects.

Helkeramiske protetiske erstatninger

Periimplantitt – en ny folkesykdom?

Nytt og nyttig fra NIOM

Survival of Enterococcus faecalis in infected dentinal tubules after root canal filling with different root canal sealers in vitro.

Partialproteser – fortsatt aktuell og forsvarlig behandling

Spør NIOM: Herdelamper og øyeskader.

2003

Resistance of medical gloves to permeation by methyl methacrylate (MMA), ethylene glycol dimethacrylate (EGDMA), and 1,4-butanediol dimethacrylate (1,4-BDMA).

Adhesion of endodontic sealers: scanning electron microscopy and energy dispersive spectroscopy.

Permeability of different types of medical protective gloves to acrylic monomers

Cytotoxicity of liquids and powders of chemically different dental materials evaluated using dimethylthiazol diphenyltetrazolium and neutral red tests.

2002

Erosjoner – et økende problem

The effects of dentine pretreatment on the adhesion of root‐canal sealers

Kreft i munn, ­hode og hals

Diagnoser: Hvem har rett?

Tooth bleaching

Akuttbehandling – et populært tema

Permeability of Medical Gloves to Mono- and Dimethacrylate Monomers in Dental Restorative Materials

Rotfyllingsmetoder med guttaperka

Se opp for lys fra herdelamper

Placement and replacement of restorations in primary teeth.

2001

Water sorption and solubility of dental composites and identification of monomers released in an aqueous environment.

Dimensional change following setting of root canal sealer materials.

Cytotoxic effects of visible light-cured dental materials

Rat lung inflammatory responses after in vivo and in vitro exposure to various stone particles

Fyllingsterapi i Norge – materialvalg, holdbarhet og årsaker til revisjon

Valg av fyllingsmaterialer i offentlig tannpleie

Stress relaxation in titanium-ceramic beams during veneering

Cytotoxicity of dental glass ionomers evaluated using dimethylthiazol diphenyltetrazolium and neutral red tests.

Corrosion and biocompatibility testing of palladium alloy castings.

2000

PBL tannlegene kommer

Dentale biomaterialer: Vær kritisk til reklame

Reasons for replacement of restorations in permanent teeth in general dental practice

Symptomer og diagnose bestemmer behandlingen

Keramer – en utfordring

Cytotoxicity of dental alloys, metals, and ceramics assessed by millipore filter, agar overlay, and MTT tests

Age of restorations at replacement in permanent teeth in general dental practice

Kreftrisiko ved bruk av snus

Irritation test of tissue adhesives for facial prostheses.

1999

Changes in appearance of silicone elastomers for maxillofacial prostheses as a result of aging

Using protective gloves, protection or potential risk?

Risk for spontaneous abortion among primiparous dental surgeons in Norway.

Dental workplace exposure and effect on fertility

Irritation of dental adhesive agents evaluated by the HET–CAM test

1998

Effect of water storage on the flexural properties of E-glass and silica fiber acrylic resin composite.

Effect of polymerization temperature and time on the residual monomer content of denture base polymers.

1997

Quantitative determination of type A and type B carbonate in human deciduous and permanent enamel by means of Fourier transform infrared spectrometry.

The swelling phenomenon of acrylic resin polymer teeth at the interface with denture base polymers.

How different curing methods affect mechanical properties of composites for inlays when tested in dry and wet conditions.

Swelling of poly(methyl methacrylate) resin at the repair joint

The effects of polymerization temperature on the acrylic resin denture base-tooth bond

Evidence for induction of cardiorespiratory and vascular complications by methylmethacrylate monomer in hip replacement surgery. Laboratory and animal investigations

1996

Carbon fiber reinforced root canal posts: Mechanical and cytotoxic properties.

Tissue reaction and material characteristics of four bone substitutes

1995

Casting of Ti-6Al-4V alloy compared with pure Ti in an Ar-arc casting machine

Cyclopolymerization of Dodecanidiol Dimethacrylate and Identification of Polymer Structure

Fracture toughness and flexural strength of dental ceramics for titanium

Mold filling of Ti castings using investments with different gas permeability

1994

Color stability of denture base polymers

How different curing methods affect the degree of conversion of resin-based inlay/onlay materials

Hydroxyapatite coatings on Ti produced by hot isostatic pressing.

1993

Porosity and mould filling of titanium castings

Dimensional fit of cast Ti-restorations

Mold filling and porosity in castings of titanium

1992

The chemistry of adhesive agents.

How does the curing lamp operate?

Chemical, physical, and histologic studies on four commercial apatites used for alveolar ridge augmentation

Types of resin-based inlay materials and their properties

1991

Staining of resin-based veneering materials with coffee and tea

1990

Effect of casting atmosphere on the quality of Ti-crowns

1989

An evaluation of the radiopacity of composite restorative materials used in Class I and Class II cavities

Creep studies of multiphase acrylic systems

1988

Release of formaldehyde from dental composites.

Composites — Characterization of composite filling materials: reactor response.

Adhesion to titanium of methacrylate-based polymer materials.

Creep and recovery of composites for use in posterior teeth during static and dynamic compression

1987

Monomers and filler content of resin-based crown and bridge materials

Surface characteristics of posterior composites after polishing and toothbrushing

Etching patterns of Co-Cr alloys for bonded cast restorations

Carbon/graphite fiber reinforced poly(methyl methacrylate): properties under dry and wet conditions.

Adhesion of resins to Ag-Pd alloys by means of the silicoating technique.

A new dental Pd−Co alloy for ceramic veneering

Composites for use in posterior teeth: composition and conversion

Polymers for healing caps on titanium implants

1986

Water sorption and filler characteristics of composites for use in posterior teeth.

Porosity in posterior composite resins

Development of carbon/graphite fiber reinforced poly (methyl methacrylate) suitable for implant-fixed dental bridges.

Composites for use in posterior teeth: mechanical properties tested under dry and wet conditions

January 1986

Implant-fixed, dental bridges from carbon/graphite fibre reinforced poly (methyl methacrylate)

1985

Some properties of a denture acrylic coating

Carbon impurities and properties of some palladium alloys for ceramic veneering

1984

Ductility and structure of some cobalt-base dental casting alloys

Ductility of a dental Ag-Pd-Cu-Au alloy

1983

Phase equilibrium in Ag-Pd-Cu dental alloys

The influence of various admixes on the physical properties of a polycarboxylate cement.

Identification of methacrylates and acrylates in dental materials by mass spectrometry

1982

Conversion in different depths of ultraviolet and visible light activated composite materials.

Compressive creep of light cured resin based restorative materials.

Conversion in denture base polymers.

The effect of asbestos-alternatives on the accuracy of cast veneer crowns

A novel miniature bite force recorder and its clinical application.

1981

Unpolymerized surface layers on sealants.

Bond strength of porcelain to dental alloys – an evaluation of two test methods

1980

Release of formaldehyde from denture base polymers

Compressive creep of denture base polymers

Flexural properties of denture base polymers

1979

Problems with sealants for bracket bonding

1978

Remaining methacrylate groups in composite restorative materials

1976

An infrared spectroscopic study of sealants