Publications

NYTT FORMAT

Gul, A., Papia, E., Naimi-Akbar, A., Ruud, A. & Vult von Steyern, P. (2024).
Zirconia dental implants; the relationship between design and clinical outcome: A systematic review.
Journal of Dentistry, Volume 143, 104903, ISSN 0300-5712.
Doi: 10.1016/j.jdent.2024.104903

Stavropoulos, A., Bertl, K., Isidor, F. & Vult von Steyern, P. (2023).
Implantoplasty and the risk of fracture of narrow implants with advanced bone loss: A laboratory study.
Clinical Oral Implants Research, Vol. 34, Issue 10, SN 0905-7161, SP-EP 1038-1046.
Doi: 10.1111/clr.14132

Vult von Steyern, P., Bruzell, E., Vos, L., Andersen, F. S. & Ruud, A. (2022).
Sintering temperature accuracy and its effect on translucent yttria-stabilized zirconia: Flexural strength, crystal structure, tetragonality and light transmission.
Dental Materials, Volume 38, Issue 7, Pages 1099-1107, ISSN 0109-5641.
Doi: 10.1016/j.dental.2022.04.023

Heidari, N., Amawi, R., Seweryniak, P., Bakitian, F. & Vult von Steyern, P. (2022).
Fracture resistance and fracture behaviour of monolithic multi-layered translucent zirconia fixed dental prostheses with different placing strategies of connector: An in vitro study.
Clinical, Cosmetic and Investigational Dentistry, 2022; Volume 14: Pages 61-69.
Doi: 10.2147/CCIDE.S344941

Bertl, K., Isidor, F., Vult von Steyern, P. & Stavropoulos, A. (2021).
Does implantoplasty affect the failure strength of narrow and regular diameter implants? A laboratory study.
Clinical Oral Investigations, Vol. 25, Issue 4, SP-EP 2203-2211, SN 1436-3771.
Doi: 10.1007/s00784-020-03534-8

Rutkunas, V., Larsson, C., Vult von Steyern, P., Mangano, F. & Gedrimiene, A. (2020).
Clinical and laboratory passive fit assessment of implant-supported zirconia restorations fabricated using conventional and digital workflow.
Clinical Implant Dentistry and Related Research, Vol. 22, Issue 2, SP-EP: 237-245, SN 1523-0899.
Doi: 10.1111/cid.12885

Gardell, E., Larsson, C. & Vult von Steyern, P. (2021).
Translucent zirconium dioxide and lithium disilicate: A 3-Year follow-up of a prospective, practice-based randomized controlled trial on posterior monolithic crowns.
The International journal of prosthodontics, 34(2), 163–172.
Doi: 10.11607/ijp.6795

Bakitian, F., Papia, E., Larsson, C. & Vult von Steyern, P. (2020).
Evaluation of stress distribution in tooth-supported fixed dental prostheses made of translucent zirconia with variations in framework designs: A three-dimensional finite element analysis.
Journal of Prosthodontics, Vol. 29, Issue 4, SP-EP: 315-322, SN 1059-941X.
Doi: 10.1111/jopr.13146

Löfroth, M., Ghasemimehr, M., Falk, A. & Vult von Steyern, P. (2019).
Bisphenol A in dental materials - existence, leakage and biological effects.
Heliyon, 5(5), e01711, SN 2405-8440.
Doi: 10.1016/j.heliyon.2019.e01711

Hjerppe, J. & Vult von Steyern, P. (2019).
Two decades of zirconia as a dental biomaterial – what have we learned?
Nor Tannlegeforen Tid. 2019; 129(1): 22–28.
Link to article

Johansson, C. & Vult von Steyern, P. (2019).
Porslin och glaskeramer – våra mest estetiska material.
Nor Tannlegeforen Tid. 2019; 129(1): 14–19.
Link to article

Gjerdet, N. R., Gotfredsen, K., Tanner, J., Vult von Steyern, P. & Øilo, M. (2019).
Ceramics in dentistry.
Nor Tannlegeforen Tid. 2019; 129(1): 8-11.
Link to article

Lindström, M. J. R., Ahmad, M., Jimbo, R., Ameri, A., Vult Von Steyern, P. & Becktor, J. P. (2019).
Volumetric measurement of dentoalveolar defects by means of intraoral 3D scanner and gravimetric model.
Odontology, Vol. 107, Issue 3, SP-EP: 353-359, SN 1618-1255.
Doi: 10.1007/s10266-018-00410-6

Bakitian, F., Seweryniak, P., Papia, E., Larsson, C. & Vult von Steyern, P. (2019).
Load-bearing capacity of monolithic zirconia fixed dental prostheses fabricated with different connector designs and embrasure shaping methods.
Journal of Prosthodontics, Vol. 28, Issue 1, SP-EP: 64-70, SN 1059-941X.
Doi: 10.1111/jopr.13002

Nakamura, K., Ankyu, S., Nilsson, F., Kanno, T., Niwano, Y., Vult von Steyern, P. & Örtengren, U. (2018).
Critical considerations on load-to-failure test for monolithic zirconia molar crowns.
Journal of the Mechanical Behavior of Biomedical Materials, Vol. 87, SP-EP: 180-189, SN 1751-6161.
Doi: 10.1016/j.jmbbm.2018.07.034

Bakitian, F., Seweryniak, P., Papia, E., Larsson, C. & Vult von Steyern, P. (2018).
Effect of different semimonolithic designs on fracture resistance and fracture mode of translucent and high-translucent zirconia crowns.
Clinical, cosmetic and investigational dentistry, 10, 51–60.
Doi: 10.2147/CCIDE.S157118

Papia, E., Arnoldsson, P., Baudinova, A., Jimbo, R. & Vult von Steyern, P. (2018). 
Cast, milled and EBM-manufactured titanium, differences in porcelain shear bond strength.
Dental Materials Journal, Vol. 37, Issue 2, SP-EP: 214-221.
Doi: 10.4012/dmj.2016-404

Bakitian, F., Seweryniak, P., Papia, E., Larsson, C. & Vult von Steyern, P. (2017).
Fracture strength of veneered translucent zirconium dioxide crowns with different porcelain thicknesses.
Acta Biomaterialia Odontologica Scandinavica, Vol. 3, Issue 1, SP-EP: 74-83.
Doi: 10.1080/23337931.2017.1403288

Haag, P., Khan, F., Andersson, M. & Vult von Steyern, P. (2018).
Influence of firing conditions and production methods on fracture strength of titanium-based metal ceramic crowns.
Journal of Adhesion Science and Technology, Vol. 32, Issue 3, SP-EP: 225-238, SN 0169-4243.
Doi: 10.1080/01694243.2017.1352119

Korduner, E-K., Söderfeldt, B., Bagewitz, I., Vult von Steyern, P. & Wolf, E. (2016).
The shortened dental arch concept from the perspective of Swedish General Dental Practitioners: a qualitative study.
Swedish Dental Journal, 40(1): 1-12. 
Link to article

Korduner, E-K., Collin Bagewitz, I., Vult von Steyern, P. & Wolf, E. (2016).
Prosthodontic decision-making relating to dentitions with compromised molars: the perspective of Swedish general dental practitioners.
Journal of Oral Rehabilitation, Vol. 43, Issue 12, SP-EP: 967-976, SN 0305-182X.
Doi: 10.1111/joor.12432

Larsson, C. & Vult von Steyern, P. (2016).
Ten-year follow-up of implant-supported all-ceramic fixed dental prostheses: A randomized, prospective clinical trial.
The International journal of prosthodontics, Vol. 29, SP-EP: 31-34.
Doi: 10.11607/ijp.4328

 

Mahmood, D., Linderoth, E., Wennerberg, A. & Vult Von Steyern, P. (2016).
Influence of core design, production technique, and material selection on fracture behavior of yttria-stabilized tetragonal zirconia polycrystal fixed dental prostheses produced using different multilayer techniques: split-file, over-pressing, and manually built-up veneers.
Clinical, Cosmetic and Investigational Dentistry, Vol. 8, Pages 15-27.
Doi: 10.2147/CCIDE.S94343

Nordahl, N., Vult von Steyern, P. & Larsson, C. (2015).
Fracture strength of ceramic monolithic crown systems of different thickness.
Journal of Oral Science, Vol. 57, Issue 3, SP-EP: 255-261.
Doi: 10.2334/josnusd.57.255

Larsson, C., Drazic, M., Nilsson, E. & Vult von Steyern, P. (2015).
Fracture of porcelain-veneered gold-alloy and zirconia molar crowns using a modified test set-up.
Acta Biomaterialia Odontologica Scandinavica, 1(1), 35–42, ISSN 2333-7931.
Doi: 10.3109/23337931.2015.1057825

Papia, E., Jimbo, R., Chrcanovic, B. R., Andersson, M. & Vult von Steyern, P. (2014).
Surface structure and mechanical properties of impaction-modified Y-TZP.
Dental Materials, Vol. 30, Issue 8, SP-EP: 808-816, SN 0109-5641.
Doi: 10.1016/j.dental.2014.05.002

Borg, M., Vult von Steyern, P. & Larsson, C. (2014).
Titanium- and zirconia-based implant-supported fixed dental prostheses. A randomized, prospective clinical pilot study.
Swedish Dental Journal, Vol. 38, Issue 1, 23-30.
Link to article

Vennerström, M., Fakhary, M. & Vult von Steyern, P. (2014).
The fit of crowns produced using digital impression systems.
Swedish dental journal, Vol. 38, SP-EP: 101-10.
Link to article

Vult von Steyern, P., Ekstrand, K., Svanborg, P. & Örtorp, A. (2014).
Framställning av  protetiska konstruktioner.
Tandläkartidningen, Årg. 106, Nr. 2, 56-66.
Link to article

Mahmood, D. J., Linderoth, E. H., Von Steyern, P. V. & Wennerberg, A. (2013).
Fracture strength of all-ceramic (Y-TZP) three- and four-unit fixed dental prostheses with different connector design and production history.
Swedish dental journal, 37(4), 179–187.
Link to article

Papia, E., Larsson, C., du Toit, M. & Vult von Steyern, P. (2014).
Bonding between oxide ceramics and adhesive cement systems: A systematic review.
Journal of Biomedical Materials Research Part B: Applied Biomaterials, Vol. 102, Issue 2, SP-EP: 395-413, SN 1552-4973.
Doi: 10.1002/jbm.b.33013
 

 

 

GAMMELT FORMAT

Reliability of the impression replica technique

 

 

Fracture strength of monolithic crowns made of high-translucent yttrium oxide-stabilized zirconium dioxide compared to porcelain veneered crowns and lithium di-silicate crowns

 

Fracture strength of porcelain fused to metal crowns made of cast, milled or laser-sintered Co-Cr

Implant-supported full-arch zirconia-based mandibular fixed dental prostheses. Eight-year results from a clinical pilot study

Fracture strength of yttria-stabilized zirconium-dioxide (Y-TZP) fixed dental prostheses (FDPs) with different abutment core thickness and connector dimensions

Internal vs. external connections for abutments/reconstructions: a systematic review

Impaction-modified densely sintered yttria-stabilized tetragonal zirconium dioxide: Methodology, surface structure, and bond strength

The influence of support properties and complexity on fracture strength and fracture mode of all-ceramic fixed dental prostheses

Fracture strength of yttria-stabilized tetragonal zirconia polycrystals crowns with different design: an in vitro study

Class II composite restorations: importance of cervical enamel in vitro

Five-year follow-up of implant-supported Y-TZP and ZTA fixed dental prostheses. A randomized, prospective clinical trial comparing two different material systems

A prospective study of implant-supported full-arch yttria-stabilized tetragonal zirconia polycrystal mandibular fixed dental prostheses: three-year results

Fracture strength of three-unit fixed partial denture cores (Y-TZP) with different connector dimension and design

Bond strength between different bonding systems and densely sintered alumina with sandblasted surfaces or as produced

Effect of framework shape on the fracture strength of implant-supported all-ceramic fixed partial dentures in the molar region

Fracture strength of four-unit Y-TZP FPD cores designed with varying connector diameter. An in-vitro study

The effect of core framework designs on the fracture loads of all-ceramic fixed partial dentures on posterior implants

AII-ceramic two- to five-unit implant-supported reconstructions. A randomized, prospective clinical trial

Haag P, Andersson M, Vult von Steyern P, Oden A. 15 Years of Clinical Experience with Procera®. A Review. Appl Osseointegration Res 2004; 4: 7-12.

Fracture strength of two oxide ceramic crown systems after cyclic preloading and thermocycling

Clinical marginal gap of porcelain fused to electro-formed gold coping crowns

Clinical marginal and internal gaps of In-Ceram crowns fabricated using the GN-I system

Clinical marginal and internal gaps of Procera AlICeram crowns

Use of abutment-teeth vs. dental implants to support all-ceramic fixed partial dentures: an in-vitro study on fracture strength

AII-ceramic fixed partial dentures designed according to the DC-Zirkon technique. A 2-year clinical study

Fracture strength of In-Ceram all-ceramic bridges in relation to cervical shape and try-in procedure. An in-vitro study

Five-year evaluation of posterior all-ceramic three-unit (In-Ceram) FPDs

Removable partial denture design habits in general dental practice in Sweden

Scientific textbook chapters and other publications

Scientific textbook chapters:

Vult von Steyern P. All-ceramic bridges. In Esmark L, Hensten A, Öwall B, eds. Current Nordic Odontology 2007. Copenhagen; Munksgaard 2007.

Vult von Steyern P. Dental ceramics in the clinic, where are we today? In Esmark L, Karlsson S, Strand G, eds. Current Nordic Odontology 2010. Copenhagen; Munksgaard 2010; 155-168.

Molin Thorén M, Vult von Steyern P. Cosmetic and Aesthetic Considerations. In Karlsson S, Nilner K, Dahl BJ, eds. Fixed Prosthodontics, the Scandinavian Approach, 2nd ed 2013.

Vult von Steyern P. Dental Ceramics in Clinical Practice. In Karlsson S, Nilner K, Dahl BJ, eds. Fixed Prosthodontics, the Scandinavian Approach, 2nd ed., 2013

Vult von Steyern P, Papia E. Ceramics and cementation techniques; a summay. Current Nordic Odontology 2016. Copenhagen; Munksgaard 2016. 208 - 227.

Vult von Steyern P. Intra Oral Scanning and Intraoral Optical Scanners (IOS). Current Nordic Odontology 2016. Copenhagen; Munksgaard 2022. 88 – 101.

Publications in languages other than English or Swedish:

Tsumita M, Kokubo Y, Ohtsuka T, Nakamura Y, Fukushima S, Vult von Steyern P. Influences of Core Frame Design on the Mechanical Strength of Posterior AII-Ceramic Fixed Partial Dentures. Part 1. Two dimensional Finite Element Analysis. Language: Japanese.

Vult von Steyern P, Jonson O, Nilner K. 5-jahres-evaluation dreigliedriger vollkeramisher (In-Ceram) seiten-zahnbrücken. Quintessenz 2002; 53: 149-154. Language: German

Vult von Steyern P, Jonson O, Nilner K. Estudio de DPF posteriores de tres unidades totalamente ceramicas (In-Ceram) durante cinco anos. Revista Internacional de Protesis Estomatologica. Edicion Hispanoamerican 2002; 4: 60-65. Language: Spanish

Dissertations

Vult von Steyern P. Porcelain and high strength care ceramics for fixed partial dentures. A clinical and in-vitro study. Malmö university Odontological Dissertations 2001. Licentiat dissertation.

Vult von Steyern P. All-ceramic fixed partial dentures. Studies on aluminum oxide- and zirconium dioxide-based ceramic systems. Swed Dent J Suppl. 2005;(173):1-69. Doktoral dissertation.